// ============================================================
//  User_Setup.h – TFT_eSPI config para M130T-240240-RGB-7-V1.1
//  Driver: ST7789, 240x240, SPI, sin CS (CS=GN)
// ============================================================

#define USER_SETUP_LOADED

// --- Pines ESP32 (WROOM-32 / DevKitC) ---
// Los TTP223 (3 unidades) van en BTN_NEXT/BTN_DONE/BTN_SNOOZE
// y el vibrador en VIBRATOR_PIN (definidos en main.cpp).

#pragma once

#define TFT_MOSI 23
#define TFT_SCLK 18
#define TFT_CS   -1      // CS no se usa (va a GND en el módulo)
#define TFT_DC    4      // Data/Command
#define TFT_RST   2      // Reset
#define TFT_BL   32      // Backlight (LED) – PWM opcional

#define TFT_SPI_FREQUENCY  40000000
#define TFT_SPI_READ_FREQUENCY 20000000

// --- Driver y resolución ---
#define ST7789_DRIVER
#define TFT_WIDTH  240
#define TFT_HEIGHT 240

// Offsets típicos para ST7789 240x240 (varían por lote, ajustar si sale desplazado)
#define TFT_ROTATION 0
#define CGRAM_OFFSET              // necessário para ST7789
#define ST7789_GAMMA_CTRL1 0xD0
#define ST7789_GAMMA_CTRL2 0x04
#define ST7789_GAMMA_CTRL3 0x0D
#define ST7789_GAMMA_CTRL4 0x11
#define ST7789_GAMMA_CTRL5 0x0C
#define ST7789_GAMMA_CTRL6 0x27
#define ST7789_GAMMA_CTRL7 0x32
#define ST7789_GAMMA_CTRL8 0x4D
#define ST7789_GAMMA_CTRL9 0x42
#define ST7789_GAMMA_CTRL10 0x16

// --- Fuentes y sprites ---
#define SMOOTH_FONT
#define SPI_FREQUENCY        40000000
#define SPI_READ_FREQUENCY   20000000
#define SPI_TOUCH_FREQUENCY   2500000